Our Service & Support Teams Are Here to Help!
Request Support
Request service, programming assistance, re-calibration or RMA help.
Product Downloads
Access the latest version of the datasheet or manual for your instrument.
FAQs
Information on special programs, applications, and where to find more information on using your instrument.
Firmware & Updates
Firmware, software, GUI and other downloads for updating and using your instrument.
Ordering & Export Documents
End-user statement, wire transfer banking documents, and other export information.
Tech Guides & Product Information
Information on programming and using the unit's advanced features.
Pulse Generator Support
Resetting, programming, and using the pulse generator.
Resources
Datasheets & Manuals
Pulse Generators
8000 Boards Datasheet
9200 Sapphire Datasheet | Manual
9200+ Sapphire Datasheet | Manual
9250 Emerald Datasheet | Manual
9420 Datasheet | Manual
9500+/8510 Manual
9520 Datasheet | Manual
9530/8530 Manual
9530 Datasheet
9550 Datasheet | Manual
Laser Systems
LS635B Manual
LSC 1650 Datasheet | Manual
LDDC 1550 Datasheet | Manual
Jewel Laser Datasheet | Manual
MicroJewel Datasheet | Manual
MiniJewel Datasheet | Manual
MiniSystem Manual
Current Generators
This technical guide from Quantum Composers highlights the general troubleshooting steps for common errors associated with the pulse and delay generators.
A unique feature of the Quantum Composers’ pulse generators is the ability to clone the settings of one unit onto a second unit. Cloning the settings reduces the amount of time spent setting up a recently purchased unit or even a loaner unit if your unit needs to be returned for calibration.
The Communications Terminal program is a convenient way to remotely interface with Quantum Composers pulse generators and is provided with every pulse generator. This tech guide will give instructions on how to install, configure, and program the comm terminal software.
Quantum Composers pulse generators can provide an array of output pulse trains with precise timing and unparalleled flexibility. Each channel can provide independent width and delay control within some restrictions. This technical document explains the restrictions on width and delay and how those settings affect the channel output.
One of the more unique features of the Quantum Composer pulse generators is the ability to combine the timing of any or all channels together and output them out of any of the output BNCs. The multiplexing function (MUX) can be set through remote communications via a computer or from the front panel of most units.
Quantum Composers pulse generators have two levels of mode selection: system modes and channel modes. Combining these two modes together allows for complex pulse trains to be generated by one unit. Most Quantum Composers pulse generators contain both system and channel mode settings to provide the most
comprehensive pulse generation solution available.
The 9732 Series Current Generator allows for the outputs on Channels A & B to be wired together in a parallel configuration; thus, potentially allowing for current levels up to 12 Amps through the load. This can be
accomplished ONLY with the implementation of 2 external blocking diodes. When operating in this mode, the limitations on each channel remain constant; although, the current settings will now be additive through the load. The user may also incorporate a “piece-wise” current waveform by properly altering the pulse widths and delays.
Restore Pulse Generator to Default Settings
If your pulse generator isn't quite generating the pulses you expect or the settings have been adjusted, try resetting it back to the default.
Follow along with this video to quickly recall the default settings on the 9520, 9420, and 9200 series pulse generator.
Troubleshooting Tips