The Model 9514+ Digital Delay-Pulse Generator with
4 independent outputs is designed to provide cutting edge, yet cost-effective
solutions to generate and synchronize multiple pulses for a variety of applications.
The delay and pulsewidth for each
channel are independent and digitally controlled which makes this pulse
generator ideal for situations that require synchronizing a number of different
events. Flexible operating modes allow
complete control of pulse outputs, including continuous, duty cycle, burst and
single shot with external trigger/gate. Advanced
features such as Multiplexing allow the timing of all or several channels to be
combined for complex pulse patterns. For
automated test equipment, complete control of the instrument is provided
through the standard RS232, USB and GPIB Interface - Ethernet is optional.
FEATURES
Operational Modes
- continuous, external trigger, single shot, duty cycle, burst, gate
Enhanced Channel Modes
- enable, independent gate, divide-n all channels
External Trigger/Gate
SPECIFICATIONS
| Channels: | 4 |
| Outputs: | 4 |
| Frequency: | 5 MHz |
| Resolution: | 1 ns |
| Jitter: | <400ps |
| Number of Stored Configurations: | 12 |
| RS-232 Interface: | Standard |
| GPIB Interface: | Standard |
| USB Interface: | Standard |
| Ethernet: | Optional |
| Available Outputs: | - TTL/CMOS
- Adjustable 2-20V
- 35V (option)
|
| PULSE GENERATION |
| CHANNELS |
4 independent outputs, with digitally controlled delay |
| MODES |
normal, single, shot, burst, duty cycle |
| MULTIPLEXER |
combine any of the channels |
| DELAY |
0 - 1000 sec |
| PULSEWIDTH |
10 ns - 1000 sec |
| RESOLUTION |
1 ns |
| ACCURACY |
1 ns + .0001 delay |
| TIMEBASE |
100 MHz, 25 PPM crystal oscillator |
| RMS Jitter |
< 400 ps |
| BURST MODE |
1 - 1,000,000 pulses |
| EXTERNAL TRIG/GATE |
| RATE |
DC -5 MHz |
| THRESHOLD |
200 mV - 15 V |
| INPUT RANGE |
0 - 30 V |
| TRIGGER SLOPE |
rising or falling edge |
| RMS JITTER |
< 5 ns |
| INSERTION DELAY |
< 150 ns |
| INTERNAL RATE GENERATOR |
| MODES |
single shot, burst, continuous, duty cycle |
| RATE (To period) |
200 ns to 5000 sec (.0002 Hz to 5 MHz) |
| RESOLUTION |
10 ns |
| ACCURACY |
5 ns + .0001 x period |
| RMS JITTER |
< 400 ps |
| BURST MODE |
1 to 1,000,000 pulses |
| OUTPUTS |
| OUPUTS |
TTL/CMOS or Adjustable Mode |
| IMPEDANCE |
50 Ohms |
| SLEW RATE |
> .5 V/ns |
| OVERSHOOT |
< 100 mV + 10% of pulse amplitude |
| AMPLITUDE |
adjustable
1 - 10 V into 50 Ohms load
2 - 20 V into high impedance load |
| CONFIGURATIONS |
| USER SET-UP STORAGE |
Storage Capacity: 12 |
| COMPUTER INTERFACE |
| RS232 | 4800.9600,19200,38400 Baud.
All instrument functions and settings may be controlled over the interface bus.
|
| GPIB | IEEE 488.2
|
| USB | v 1.0
|
| Ethernet | |
| GENERAL |
| DIMENSIONS |
10.5” x 8.25” x 5.5” |
| WEIGHT |
8 lbs |
| POWER |
20 Watts
100 - 240 VAC
47 - 63 Hz
< 1 A |
|
