Quantum Composers, Inc.,
specializes in precision pulse generator technology, digital
delay generators and development of custom controls,
electronics and lasers for the electronic, opto-mechanical and photonic industries.
The 9530 Pulse Generator incorporates laser timing and laser synchronization to effectively produce any series of events.
The 9530 is ideal for laser timing applications with eight independent outputs, dual laser trigger/gate inputs and external laser clock reference input.
The 9530 can accept a low amplitude 20mV, 100MHz clock frequency, which offers the
ability to synch directly to a laser photodiode signal and allows for system timing with low jitter laser timing.
The 9530 can be used as a master time base to other delay generators or equipment with a 50 Ohm load.
Precision laser timing is the foundation for the 9530 Pulse Generator - offering 50ps internal jitter and 250ps Delay and Width resolution.
The following features allow the users to set up an intricate experiment or synchronizing multiple timed events: Ethernet/USB interface, complex burst sequences, Divide-by-N,
Setting Profiles, Dual Triggers, Clock Divider, Pulse Picking and Negative Delays
Complimentary LabVIEW tm NI certified drivers available.
9530 Pulse Generator Features:
4 or 8 independent outputs with complete individual programming and control
Internal rate generator – 10ns period resolution spanning entire frequency range (10MHz)
Complete channel and system setup stored in memory – Includes 12 memory storage slots
Remote programmability –RS232, USB and Ethernet
250ps laser timing resolution with less than 50ps jitter
Dual inputs with gate and/or trigger
9530 Pulse Generator Advanced Features:
Clock input/output allowing master clock input up to 100MHz with whole system laser timing relative to that signal with low jitter
Programmable in the field – customization of features, upgrades and modifications through completely programmable FPGA
Settings and Programming saved when powered down
9530 Advanced Programming Modes and Channel Properties:
Multiplexing – combines the laser timing of any or all of the channels to one output
Burst – Each channel can have separate numbers
Duty Cycle – N pulses on, M pulses off. Duty Cycle setting allows laser firing at an ideal rate,
but picks pulses out at the user’s specified rate
Channel Referencing – Any or all channels can reference the laser timing of any channel instead of T0
Wait – They system will wait for a pre-determined number of cycles before producing the pulse
The Quantum Composers 9530 Digital Delay Pulse Generator series provides optimal laser synchronization,
laser timing and laser triggers
that precisely controls any series of events.
Pulse Generator Applications
The Quantum Composers Pulse Generators are designed in a modular architecture to meet a wide variety of applications.
