Current Product
Additional Product Images
9530 Digital Delay Pulse Generator
- 250 ps Timing Resolution
- < 50 ps Jitter
- 1U Rackmount Ready
- Easy Programming Interface
- 4 or 8 Independent Channel Outputs
- Free LabVIEW Driver
- Ethernet, USB, RS232 Standard
- Full Customer Support
- 2 Year Warranty
Please contact us to receive a quick quote or to outline your application if our commercial products do not exactly fit your needs. We can discuss customized solutions for you.
- Product Details
-
Full Product Details:Innovative approach to high-quality laser timing and synchronizing at affordable pricing.The 9530 Pulse Generator provides laser timing and synchronization to effectively trigger any series of events or necessary equipment with eight independent outputs, dual inputs with gate and/or trigger and external clock reference input.
The 9530 can accept a low amplitude clock frequency down to 20 mV, up to 100 MHz. This offers the ability to phase-lock directly to a laser photodiode signal, providing system timing synchronicity with the laser with very low jitter 50 ps.
Complimentary Labview Drivers (NI certified) available.
9530 Pulse Generator Features:
- 4 or 8 independent outputs providing pulse width and delay at 250 ps, amplitude, rate, and mode programming control
- 250 ps timing resolution with less than 50 ps jitter
- Internal rate generator – 10 ns period resolution spanning entire frequency range (10 MHz)
- Complete channel and system setup stored in memory – includes 12 memory storage slots
- Remote programmability – RS232, USB and Ethernet standard
- Free LabView driver
- Dual inputs with gate and/or trigger
9530 Pulse Generator Advanced Features:- Clock input/output allowing master clock input up to 100 MHz with whole system laser timing relative to that signal with low jitter 50 ps.
- Programmable in the field – customization of features, upgrades and modifications through programmable FPGA
- Settings and Programming saved when powered down
9530 Advanced Programming Modes and Channel Properties:- Multiplexing – combines the laser timing of any or all of the channels to one output
- Burst – Each channel can have separate numbers
- Duty Cycle – N pulses on, M pulses off. Duty Cycle setting allows laser firing at an ideal rate, but picks pulses out at the user’s specified rate
- Channel Referencing – Any or all channels can reference the laser timing of any channel instead of TØ
- Wait – They system will wait for a pre-determined number of cycles before producing the pulse
- Options
9530 Series Options:
DT15 - Dual Trigger Input
The DT15 module option allows the Gate input to double as a second trigger input.
I-Pulse Increment Option for the 9530 Series
The (I) increment modes for the 9530 series Pulse Generators are a pair of special modes which allows the delay and width of each channel to be incremented at the end of a burst of pulses.
TZ50 - 50 Ohm Output Module
The TZ50 option allows a user to have a 50 Ohm load on the output while maintaining an output amplitude of at least 4 Volts while in the TTL/CMOS mode.- Pricing
-
9530 Base Pricing:
9534 (4 Channel) Base Price: $3,700
9538 (8 Channel) Base Price: $5,420
Click Here to request a quote or get pricing on available optionsClick Here to see our discounts and special programs
- Downloads
-
9530 Datasheet
Click to Download
9530 Manual
Click to Download
9530 Configuration Guide/Part Number Chart
Click to Download
Support Downloads
Click to Browse Support Documents, Drivers and Firmware
