9520 Digital Delay Pulse Generator

Tweet

Full Product Details:
Our 9520 Series Pulse Generator provides the utmost flexibility and performance in a bench-top digital delay pulse generator. Designed in a modular architecture, customers can choose from a variety of output and input options. Dual inputs provide trigger and gating or two separate triggers. Illuminated front panel buttons and large display provide clear manual programming. External clock in/outputs allow synchronizing to an external clock source up to 100 MHz.

9520 Pulse Generator Features:

• 2, 4, or 8 independent outputs providing pulse width and delay at 250 ps, amplitude, rate, and mode programming control
• 250 ps timing resolution with less than 50 ps jitter
• Internal rate generator – 10 ns period resolution spanning entire frequency range (10 MHz)
• Complete channel and system setup stored in memory – Includes 12 memory storage slots
• Remote programmability – RS232 and USB standard
• Free LabVIEW driver
• Dual inputs with gate and/or trigger
• 9520 Pulse Generator Advanced Features:
• Clock input/output allowing master clock input up to 100 MHz with whole system timing relative to that signal with low jitter (< 50 ps)
• through completely programmable FPGA
• Settings and Programming saved when powered down
• Programmable in the field – customization of features, upgrades and modifications

9520 Advanced Programming Modes and Channel Properties:

• Multiplexing – combines the laser timing of any or all of the channels to one output
• Burst – Each channel can have separate numbers
• Duty Cycle – N pulses on, M pulses off.  Duty Cycle setting allows laser firing at an ideal rate, but picks pulses out at the user’s specified rate.
• Channel Referencing – Any or all channels can reference the laser timing of any channel instead of T0
• Wait – They system will wait for a pre-determined number of cycles before producing the pulse

9520 Series Options:

AT35 - 35 Volt Output Module

The AT35 module increases the maximum voltage output to 35 V.


AT45 - 45 Volt Output Module

The AT45 option increases the maximum voltage output to 45 V and also decreases the rise time.


COM- Communications Package

The communications package includes ethernet and GPIB.


DT15 - Dual Trigger Input

The DT15 module option allows the Gate input to double as a second trigger input.


I-Pulse Increment Option for the 9520 Series

The (I) increment modes for the 9520 series Pulse Generators are a pair of special modes which allows the delay and width of each channel to be incremented at the end of a burst of pulses.


SRS - DG535 Programming Compatibility

The DG535 option enables the Pulse Generator to respond to Stanford Research Systems programming commands for the DG535 Pulse Generator.


TZ50 - 50 Ohm Output Module

The TZ50 option allows a user to have a 50 Ohm load on the output while maintaining an output amplitude of at least 4 Volts while in the TTL/CMOS mode.


Rack Mounting Kits

9520 Series Double Rackmount

9520 Series Single Rackmount

9520 Base Pricing:

9522 (2 Channel) Base Price: $2,600

9524 (4 Channel) Base Price: $3,520

9528 (8 Channel) Base Price: $5,160


Rack Mounts

SRM Single Rack Mount- $250

DRM Double Rack Mount- $300

Click Here to request a quote or get pricing on available options

Click Here to see our discounts and special programs

9520 Datasheet

Click to Download

9520 Manual

Click to Download

9520 Configuration Guide/Part Number Chart

Click to Download

Support Downloads

Click to Browse Support Documents, Drivers and Firmware